FORKLIFT CLAMP INSTRUCTIONS HOW TO

Filter systems and catalytic converters are just two of the avenues that can be used to extract fumes however, they don’t necessarily provide adequate ventilation.

Adequate ventilation to remove the fumes must be provided and the engines must be properly maintained. In some circumstances, forklifts are powered by internal combustion engines. There are risks associated with each, so it’s important that you follow the safety advice at all times and take proper precautions. Most forklifts are powered by electric batteries or internal combustion engines (LPG, petrol or diesel). It’s incredibly important that the supplier’s instructions are followed at all times too. They can’t just be simply fitted, the overall capacity of the forklift needs to be reduced, which is commonly known in the industry as ‘derating.’ This should only be carried out by a highly qualified and experienced manufacturer.Īnd once attachments have been fitted, the same applies to how they’re secured too – the attachment or securing device mustn’t interfere with any part of the mast structure during the raising or lowering of the attachment. How they’re installed is a key contributing factor too. However, it’s equally important to remember that they can impact the stability of forklifts and therefore mustn’t be used without the advice of a supplier or manufacturer, such as ourselves.īut it’s not just the type of attachment that can pose a risk. It should be stated on the lift-truck capacity plate or capacity chart.įorklift fork attachments can enhance the safety of load handling, providing they’re suitable for the machine and working conditions.įork extensions, booms, rotating heads, drum clamps, paper roll clamps, bale clamps and load stabilisers are all examples of the attachments that can be used. This is the maximum load that can be carried at a set distance from the heels of the forks to a specified height.

That’s why it’s incredibly important to always work within the safe working load. However, accidents can easily happen if loads are too large. Manufacturers have a legal duty to help reduce risk by making sure their machinery is fit for purpose and designed to be safe across areas, including:Ĭapacity is particularly important, as it’s essential that forklifts can do the work that’s required of them. they need to be suitable and safe for their intended use. Legislation aside, responsible forklift truck operation also applies to how the vehicles are designed and manufactured too, i.e.

Control of Substances Hazardous to Health Regulations 2002 (COSHH).

Workplace (Health, Safety and Welfare) Regulations 1992.

Lifting Operations and Lifting Equipment Regulations 1998 (LOLER).

Provision and Use of Work Equipment Regulations 1998 (PUWER).

Management of Health and Safety at Work Regulations 1999.Health and Safety at Work etc Act 1974 (HSW Act).Here’s an overview of the guidance, starting with a list of the legislation that applies to forklift truck operation:

FORKLIFT CLAMP INSTRUCTIONS HOW TO

Such are the dangers associated with operating forklift trucks, that the HSE has published detailed guidance on how to use rider-operated lift trucks safely, including the training that’s required and main legal requirements. At best, employers wind up with having to repair their damaged forklift trucks, buildings, forklift fork attachments, goods and much more. According to the Health and Safety Executive (HSE), these vehicles are involved in about a quarter of all workplace transport accidents.Īt worst, people can be injured, and even killed. Five-minute overview: Best practice advice for maintaining forklift truck safety Operating forklift trucks can be a dangerous business and the working environments in which they’re used are not without their risks either.įorklifts are widely used for moving materials and goods, but while their use may be widespread, the stakes are high.

Forklift clamp instructions